Proximity card and QR codes reader
–
Installation manual
AAT Holding S.A. All rights reserved.
1.
Introduction
Proximity card reader and QR code reader type KDH-C150MQR QR codes is
designed to work in access control systems.
Reader can work with controllers with Wiegand interface. Readers allow to read
the user identification number (UID) from Mifare Classic cards and QR code
from the smartphone display or printed on a piece of paper.
Reader characteristics
•
Working with controllers with Wiegand port
•
Proximity card (13,56 MHz)
–
Mifare Classic
•
Read QR codes
•
Power supply 12 VDC
Technical parameters
Name
of parameters or function
Parameters value or description
- Supply voltage
12 VDC +/- 10%
- Current load
< 150mA
- Proximity card reading range
From 1 to 5 cm
- QR code reading range
From 5 to 20 cm
- Proximity card type
Mifare Classic
- Wiegand format
26/34 Wiegand
- QR Code
Tak, number 1-10 characters
- Maximum distance from controller
30m
- Enviroment
For indoor installation
- operating temperature
-
20°C to +60°C
- relative humidity
10 % - 90% RH
- dimensions
120mm x 66 mm x 23 mm
KDH-C150MQR
