Wideodomofony Novus
–
Instrukcja obsługi NVE
-EP200.
Video intercom Novus
–
Installation manual NVE-EP200
AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
Wszelkie prawa zastrzeżone. All rights reserve
d
23
IMPORTANT SAFEGUARDS AND WARNINGS:
1.
Prior to undertaking any action please consult the following manual and read all the
safety and operating instructions before starting the device.
2.
Please keep this manual for the lifespan of the device in case referring to the contents
of this manual is necessary;
3.
All the safety precautions referred to in this manual should be strictly followed, as
they have a direct influence on user’s safety and durability and reliability of the
device;
4.
All actions conducted by the servicemen and users must be accomplished in
accordance with the user’s manual;
5.
The device should be disconnected from power sources during maintenance
procedures;
6.
Usage of additional devices and components neither provided nor recommended by
the producer is forbidden;
7.
Mounting the device on unstable surface or using not recommended mounts is
forbidden.
8.
Improperly mounted device may cause a fatal accident or may be seriously damaged
itself. Device must be mounted by qualified personnel with proper authorization, in
accordance with this user’s manual;
9.
Device should be supplied only from a power sources whose parameters are in
accordance with those specified by the producer in the device’s technical datasheet.
Therefore, it is forbidden to supply the device from a power sources with unknown
parameters, unstable or not meeting producer’s requirements;
10.
Signal and power cables should be placed in a way excluding the possibility of
damaging them by accident. Special attention must be paid to cables getting from the
device and connecting the power supply;
11.
Electric installation supplying the device should be designed to meet the
specifications given by the producer in such a way that overloading is impossible;
12.
User cannot repair or upgrade the equipment himself. All maintenance actions and
repairs should be conducted only by qualified service personnel;
13.
Unplug the device from the power source immediately and contact the proper
maintenance department when the following occurs:
•
Damages to the power cord or to the plug itself;
•
Liquids getting inside the device or exposure to strong mechanical shock;
•
Device behaves in a way not described in the manual and all adjustments approved by the
•
manufacturer and possible to apply by user himself, seem not to have any effect;
•
Device is damaged;
•
Atypical behaviour of the device components may be seen (heard).
14.
In necessity of repairs attention to using only original replacement parts (with their
parameters in accordance with those specified by the producer) should be paid. Non-
licensed service and non-genuine replacement parts may cause fire or electrocution;
15.
After maintenance activities tests should be run to ensure proper operation of all the
functional components of the device
