Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
•
•
•
•
•
•
•
•
•
•
•
To avoid misuse by unauthorised persons,
don’t leave the machine unattended.
Within the path of the machine there may be
no obstructions.
Make sure the environment of the machine is
dry, clean and illuminated sufficiently.
With the machine in operation it is forbidden to
be within the operation area of this apparatus.
Before taking the machine into operation the
machine operator has to be certain that
nobody is located within the operating area of
the machine.
If the machine is used into the darkness, the
operation position has to be illuminated
sufficiently (about 50 lux).
The machine may only be used for the
intended activities.
Inspection and maintenance activities have to
be done before operation
During inspection and maintenance the
machine may not be used for other purposes
The local action and safety rules have to be
acted upon.
Make sure you never walk under the robot
during operation.
•
•
•
•
•
•
•
Keep electrical switch boxes closed in order to
prevent contact danger.
Never drive the machine over a cable or
extension cord
Make sure the mains connection is grounded
properly
Make sure that no person stands on a cable
or extension cord
Make sure that the extension cord is unrolled
completely
Extension cord minimal requirements: 3x 2,5
mm cupper wire properly isolated
Extension cord must be no longer than 25
meters.
Page 13 of 28
