background image

The HD KVM over IP Scenario is to extend HDMI/DVI, USB, analog audio(optional) over a Gigabit LAN. Video resolutions 
support up to 1080p Full HD and 1920 x 1200 DVI. 4 x USB 2.0 ports on Receiver for 1 to 1 Extension which support USB 
Keyboard, Mouse, camera, Flash Drive/Portable Hard Drive(need external power). Max. 16 x Senders w/ Server/PC, and 1 or 
200 more Receivers can be connected as a massive HD KVM Matrix.

HD KVM Over IP Scenario

1. Use IR Remote of PB7000 (Need to install IR Receiver on PB7000 Receiver's IR Receiver Jack, and Receiver's Dip Switch all 
    off 0000), press the Target Video Channel Number target to IR Receiver of Receiver to select the Video Channel Number.
2. Change Receiver's Dip Switch to match target Sender Dip Switch setting , Receiver will change Video channel after 2 seconds.

1. Plug-in USB cable (Type B to Type A) between PC/Server and Sender's USB port. And, repeat for all PC/Server and Sanders.
2. Plug-in USB Keyboard and Mouse to Receiver USB ports which with Keyboard & Mouse Icon.
    This two USB ports got Keyboard/Mouse emulation for smooth switching between different Sender/PC/Server.
    Another two USB ports can be used with USB Flash Drive, USB hub, Webcam,  and other USB device.

3. Optional Audio Setup, use 3.5mm stereo audio plug cables to connect between:
    - PC/Server's Audio Line Out to Sender's Line In, Receiver 's Audio Line Out to Speaker Line In for Audio from PC to Speaker.
    - Mic/Audio out to Receiver's Audio In/Mic In, Sender's Line Out to PC/Server's Mic In (Line In) to  for Audio from Receiver to PC.  
4. Following same Broadcasting & Multicasting Installation Procedure for whole system setup. 

To Switch Video Channel (Switch to other Video Source)

USB KVM Installation

If only one Receiver connected to the Target Sender (1 to 1), USB Link will establish automatically.
If multiple Receiver connected to same sender, Just push the USB button on Receiver about 5 seconds till "Starting USB" message 
show on screen.

To Establish USB Connection

®

PROFESSIONAL SERIES

Aavara

®

 PB7000 HDMI USB KVM/Broadcaster Quick Start Guide

Gigabit Ethernet Switch 
(Jambo Frame/IGMP enabled)

Sender

Mouse Keyboard

Server/PC 1

Server/PC 3

Server/PC 4

Server/PC 5

Server/PC 2

HDMI/DVI

Receiver

USB

CAT5e

IR Receiver

Analog Audio Cable

Video

Channel

PB7000-R

Link

RS-232

IR

 Emitter

IR

 Receiver

USB

Receiver

1 2 3 4

ON

Video

Channel

PB7000-R

Link

RS-232

IR

 Emitter

IR

 Receiver

USB

Receiver

1 2 3 4

ON

Link

RS-232

IR

 Emitter

IR

 Receiver

Video

Channel

Video Mode

Local EDID Copy

PB7000-S

Sender

1 2 3 4

ON

Link

RS-232

IR

 Emitter

IR

 Receiver

Video

Channel

Video Mode

Local EDID Copy

PB7000-S

Sender

1 2 3 4

ON

Link

RS-232

IR

 Emitter

IR

 Receiver

Video

Channel

Video Mode

Local EDID Copy

PB7000-S

Sender

1 2 3 4

ON

Link

RS-232

IR

 Emitter

IR

 Receiver

Video

Channel

Video Mode

Local EDID Copy

PB7000-S

Sender

1 2 3 4

ON

Link

RS-232

IR

 Emitter

IR

 Receiver

Video

Channel

Video Mode

Local EDID Copy

PB7000-S

Sender

1 2 3 4

ON

MADE IN TAIWAN.   Aavara® is a registered trademark of Aavara® Innovation Corp. All other trademarks and brand names remain the property of their respective owners. 

©2014 Aavara® Innovation Corp.   All rights reserved.   Email: service@aavara.com

Reviews: