6
Chapter 2 Installation
One Sender to One Receiver/HDTV configuration:
1
Connect HDMI cable between video source’s HDMI output port and HDMI input of PCE122IR-S Sender.
2
Connect one 75 Ohm RG6U Coax cable between Coax 1 output port of PCE122IR-S Sender and Coax in
input port of PCE122IR-R Receiver.
3
Connect HDMI cable between input port of HDTV/display and the PCE122IR-R Receiver’s HDMI output.
4
Plug in IR Emitter Cable into IR Emitter Jack of PCE122IR-S Sender and toward to IR Receiver Window
of Video Source Device. Plug in IR Receiver Cable into IR Receiver Jack of PCE122IR-R Receiver and
toward to IR remote location.
Notice! Be sure IR receiver not toward to any fluorescent light tube or lamp.
5
Connect the included 5V DC power supplies to PCE122IR Sender and Receiver.
6
Power on the HDTV Display and PCE122IR-R Receiver, then Video Source and PCE122IR-S Sender.
For Multiple Receivers/HDTVs configuration:
1
Splitter mode: Connect one 75 Ohm RG6U Coax cable between Coax 2 output port of PCE122IR-S
Sender and Coax in input port of Receiver 2.
2
Cascade mode: Connect one 75 Ohm RG6U Coax cable between the Coax cascade output port of
Receiver 1 and Coax in input port of Receiver 3.
3
Repeat Step 4 to connect all Receivers with Coax cables in Cascade mode.
4
Connect HDMI cables between input port of each HDTV display and each Receiver’s HDMI output port.
5
Connect the included 5V DC power supplies to all Sender and Receivers.
6
Power on the HDTV displays and PCE122IR-R Receivers, then video source and PCE122IR-S Sender.
ALL RIGHTS RESERVED. 2013 AAVARA INNOVATION CORP.
