The amplifier should be serviced by qualified service personnel
Safety instructions
Page 3
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean the amplifier only with a dry, lint-free cloth. For more thorough cleaning, unplug
the amplifier from the mains supply and go over it lightly with a damp, lint-free cloth.
Do not use any type of chemical solvents or other cleaning products for cleaning.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
7. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Unplug the amplifier during lightning storms or when unused for long periods
of time.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
10. Place the amplifier horizontally and on a suitable table or rack.
11. Refer all servicing to qualified service personnel.
12. Servicing is required when the amplifier has been damaged in any way, such as
when the powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the amplifier, the amplifier has been exposed to rain or moisture,
does not operate normally, or has been dropped.
The amplifier should be serviced by qualified service personnel when:
A. the power-supply cord or the plug has been damaged, or
B. objects have fallen, or liquid has been spilled into the amplifier, or
C. the amplifier has been exposed to rain, or
D. the amplifier does not appear to operate normally or exhibits a marked
change in performance, or
E. the amplifier has been dropped or the enclosure damaged.
1. WARNING - Take care that objects do not fall and liquids are not spilled into the
enclosure through any openings. The amplifier shall not be exposed to dripping or
splashing. Liquid-filled objects such as vases should not be placed on the amplifier.
2. The amplifier has been designed for use in moderate climates and in
domestic situations.
3. Only connect the amplifier to a power supply of the type described in the operating
instructions or as marked on the amplifier. The primary method of isolating the
amplifier from the mains supply is to remove the mains plug.
The amplifier must be installed in a manner that makes disconnection possible.
4. If an abnormal smell or smoke is detected from the amplifier,
turn the power off immediately and unplug the amplifier from the wall outlet.
Contact your dealer and do not reconnect the amplifier.
Summary of Contents for M-380
Page 1: ...User s guide M 380 Monoblock amplifier...
Page 7: ...Page 7 Personal notes...
Page 8: ...www aavik acoustics com...
