32
the engine has been run. Avoid
touching the engine and muffler while
they are still hot with any part of your
body or clothing during inspection or
repair.
1.
Remove the screws ① 8pcs, and then
pull outward on the areas of the
black
cover ②.
2.
Loosen the bolt ③ and then remove
the muffler cap ④, the muffler
screen⑤.
3.
Use a flathead screw driver to pry the
spark arrester out from the muffler.
Remove the spark arrester.
4.
Remove the carbon deposits on the
muffler screen and spark arrester using
a wire brush.
CAUTION
When cleaning, use the wire brush lightly
to avoid damaging or scratching of
muffler screen and spark arrester.
5.
Check the muffler screen and spark
arrester. Replace them if damaged.
6.
Reinstall the spark arrester and muffler
screen and the muffler cap.
7.
Reinstall the cover and tighten the
screws.
FUEL TANK FILTER
WARNING
Never use the gasoline while smoking or
in the vicinity of an open flame.
1. Remove the fuel tank cap and filter.
2. Clean the filter with gasoline.
3. Wipe the filter and install it.
4. Retighten the fuel tank cap.
NOTE:
Be sure the fuel tank cap is
tightened securely.
Summary of Contents for A112003
Page 37: ...37 WIRING DIAGRAM...
