26
3. Make sure that the DC protector is
turned on.
4. To connect the red battery charger lead
to the positive (+) battery terminal, and
connect the black lead to the negative (-)
battery terminal. Do not reverse these
positions.
CAUTION
• Connect the battery charger leads to the
battery terminals securely so that they
are not disconnected due to engine
vibration or other disturbances.
• The DC protector turns off
automatically
if current above the rated flows during
battery charging. Beforing restarting to
charge the battery, press to resetthe DC
protector. If the DC protector turns off
again, stop charging the battery
immediately and consult our service
center.
5. Disconnect the plug from the receptacle,
and remove the charge lead after fully
charged.
MAINTENANCE
Regular maintenance is most important
for best performance and safe
operation.
WARNING:
Stop the engine
before starting maintenance
work.
Proper routine maintenance of the
generator will help prolong the life of the
machine and trouble-free, as well as
eco-friendly.
If there are any questions about the
maintenance procedures listed in this
manual, please call our service center.
Recommended maintenance
schedule as below.
Summary of Contents for A112004
Page 39: ...39 WIRING DIAGRAM...