12
or crossing gravel or roads surface.
WARNING! Auger continues
to rotate after the motor is switch off.
WARNING! If snow blocks in
the chute do not try to remove it
before:
- Releasing the switch bar.
- Disconnecting the plug from the
power supplied.
- Do not put your hand inside the
chute or auger.
WARNING: Always ensure that
the ventilation openings are kept clear
of debris.
Extension Cords
1. You should only use extension cords
for outdoor use.
2. Do not use an extension cord over
100ft (30m).
Cord Length 50ft(15m) 100ft(30m)
Min.Wire
Gauge
(A.W.G.)
14
12
3. Before using, check the supply and
extension cords for signs of damaged
during use, disconnect the cord for
signs of damage or aging. If the cord
becomes damaged during use,
disconnect the cord from the supply
immediately. DO NOT TOUCH THE
CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the appliance if
the cord is damaged or worn.
4. Keep extension cord away from
auger.
Over-current Protector
This unit has an over-current protector.
In the event of a major obstruction
halting the auger, the unit will stop
running. Release the switch bar and
press the reset button. Then re-start
the machine. (Fig.12)
Fig.12
Summary of Contents for AGT3420
Page 15: ...15 Exploded View...
Page 16: ...16...