41
Technical Details
IMAGE IS BLURRED
Possible Causes
Solution
The Projector is not in focus.
Adjust the focus with the focus adjustment but-
tons on the remote control until the image comes
into focus, or use the focus adjustment buttons on
the side of the projector
The Projector is offset from plane / angle of opera
-
tion.
Move the projector so that it is both 180 degrees
and on an evern plane with the screen or adjust
the keystone through the remote, keypad or Set-
tings Menu
NO SYNC, NO SIGNAL
Troubleshooting
Be sure to setup the computer to enable a video signal output. On some laptops this is
done by pressing and holding Function F5 key. If using the P400+ as an external monitor
on Windows based systems, this can be done by selecting “extend my desktop to this moni
-
tor”. Depending on the video driver different resolutions may need to be selected for proper
output.
Summary of Contents for P400+
Page 1: ...aaxa TECHNOLOGIES User Guide P400 Mini Short Throw Projector ...
Page 25: ...Office Menu 19 In the Main Menu select the Office icon to access the N Docs app ...
Page 38: ...Language 32 In the Language Settings menu you can select your preferred language ...
Page 40: ...34 Projection Direction Front Vertical Rear Vertical Rear Inverted Front Inverted ...