ENGLISH
Auto search
1.Press and hold “POWER”and “OK” button for 3s until the indication LED light on, then release the
buttons.
2. Press button CH+ or CH-, LED blink one time and keep light on,RCU will start auto search after
waiting for 6s, the LED will blink one time when searched one group code.
3.When press button CH+ or CH-, TV POWER button is used as the search button.
4. Press OK button to save the code, LED will turn off and RCU exit search mode.
5. During auto searching, press CH+ or CH- and wait for 6s, then press CH+ to chang to search
one group code per second, or press CH- to switch to search code per 3s.
6. During auto search, press and release button CH+/CH- to switch to manual search, if no
operation within 6s, RCU will enter auto search again.
Note:
1) After entered SEARCH mode, if no operation within 30s, LED will blink twice and turn off, RCU
will exit SET UP mode automatically.
2) During searching ,only when press buttons CH+/CH-/OK/TV POWER/V+/V-/EXIT/EPG that the
TV will responds, other buttons won’t send any code.
3) During searching, press EXIT button can exit search mode, the code won’t be saved, LED will
blink twice and turn off.
4) When finished searching all the codes, LED will blink twice and turn off, RCU will exit Search
mode without saving the code.
5) The default search speed is 1s for each group code.
Code display
1.Press and hold “POWER”and “OK” button for 3s until the indication LED light on, then release the
buttons.
2. Press EPG button, LED blink twice and turn off.
3. Press 1/2/3/4 digital buttons and see the blink time of the LED to identify the current code.
(When the code is 0, LED won’t blink).
For example:
Press button 1, LED didn’t blink, the first digital is 0
Press button 2, LED blink 5 times, the 2nd digital is 5
Press button 3, LED blink 6 times, the 3rd digital is 6
Press button 4, LED blink 9 times, the 4th digital is 9
Note:
1) After entered CODE DISPLAY mode, if no operation within 30s, LED will blink twice and turn off,
RCU will exit SET UP mode automatically.
2) After enter CODE DISPLAY mode, press any buttons except digital button 1/2/3/4 that RCU will
exit current mode.
Factory data reset
1. Press and hold “OK” + “MENU” buttons for 5s, LED blink 3s and RCU return to factory setting.
7
