34
Automatic Scan
(Menu – Setup – Service searching – Automatic Scan)
Manual scan
Press
OK to start searching.
You can find specific parameters of satellites and transponders e.g. on:
http://kingofsat.net
,
http://lyngsat.com
,
www.parabola.cz
and other web pages.
Clear before scan
– „yes“:
Removes all channels searched before.
Scan Tuner A (DVB-S2)
-„yes“:
Runs searching on all available
satellites according to setting of the
tuner (if you use a motor it can last
several tens of minutes).
Tuner A or B
Type of scan
:
Single satellite
– select one sigle
satellite to be searched on and press
OK for starting the searching.
Single transponder
- insert
parameters for one particular
transponder and press OK:
System
– DVB-S or DVB-S2 .
Satellite
– name of satellite.
Frequency
– frequency of TP.
Symbol rate
Polarity
FEC
– set the right value or set „Auto“
Modulation
: QPSK – 8PSK
Network scan
– if set to „yes“ it
searches on all TPs of corresponding
provider (if the service is supported by
the provider).
Only Free scan
– searching only for
FTA channels.
