2
Using your ComPilot to Play Music
a) Connect the audio cable to the headphone socket on your audio player and the audio input on your
ComPilot. The audio indicator will light up orange.
b) Wear your Naída CI and select your preferred program for music.
c) Reduce the volume on your Naída CI.
d) Start playing the music and adjust the Naída CI volume to the desired level.
• The main button of the ComPilot will play/pause your music.
• When unpaired to your Naída CI processor(s), the Volume buttons of the ComPilot adjust the level of
the audio device.
• The Home button of the ComPilot allows you to toggle through your Naída CI programs, if configured
by your audiologist.
Using ComPilot with FM
The ComPilot can be used with the Phonak MLxi FM receiver.
a) With the ComPilot turned off, securely connect the FM receiver to the ComPilot. To avoid damage to the
receiver and/or the ComPilot, take care to align the FM receiver pins with the holes on the ComPilot.
b) Adjust the program position on the processor to the desired program for FM use.
c) Reduce the processor volume setting.
d) Switch ON the ComPilot.
e) Power ON the FM transmitter.
f) When FM is detected, the Audio indicator will change to orange and a series of notification tones will be
transmitted to the recipient.
g) To accept FM, briefly press the Main button. If FM is not accepted after 20 seconds, the FM will be ignored
and will not be transmitted to the recipient.
