14
5.
22kHz
:
Press the
◄
/
►
button to select
ON, OFF
or
Auto
.
6.
DiSEqC 1.0
:
Press the
◄
/
►
button to select the required DiSEqC1.0 input.
7.
DiSEqC 1.1
:
Press the
◄
/
►
button to select the required DiSEqC1.1 input.
8.
Motor
:
Press the
◄
/
►
button to select DiSEqC1.2 or USALS.
9.
Network search
: Press the
◄
/
►
button to select
ON
or
OFF
if you want to
implement network search.
10.
Start search
: Press the
◄
/
►
button to select Satellite & Multi-Sat & Blind
scan & Transponder & Multi-Transponder which you want to start search.
4.2.1 Antenna Settings for Satellite
Press the
◄
/
►
or
OK
button you can see the pre-stored Satellite list, in this
menu, you can execute select, Add, Move, Delete, Rename Satellites.
Ø
Select
In this menu, you can press the
▲
/
▼
keys choose the satellite which you want
to use, and then press the
OK
to confirm the setting.
Ø
Add
Press
RED
button to add a new
satellite. Here you can input new
Satellite angle, Satellite Direction
(East, West), Band (Ku, C).
OK
to
confirm the setting and this new
satellite will be added to the end
of the Satellite list.
Ø
Move
In this menu, you can Select the satellite that you want to move from the satellite
list by pressing the
GREEN
button, then press
OK
, you will be asked to move
the satellite to put where, input the destination number and press
OK
. Then you
can move one satellite from one position to another.
Summary of Contents for mini CryptoBox 500HD
Page 2: ......
Page 14: ...12 Figure7 Connecting to Dish LNB ...
Page 55: ......
Page 56: ...Mini HD Digital Satellite Receiver CryptoBox500HD ...