◎
How to lock:
◎
Unlocking steps:
(1) Use the key to unlock the lockset
:
Inserting key -> make a right turn -> lock button jump out automatically.
(2) Withdraw key
:
Make a left turn -> withdraw key from the lockset.
(3) Take out the lockset
:
Shake the lockset slightly -> withdraw lockset.
(4) Release cable
:
Release the lock cable-> unlocked.
◎
The ways of restore lockset:
(1) Lockset stays unlock position -> push the bottom of cassette lead the cable line retract automatically. (In case of any injury from
speed retraction by mechanism; it is better if you hold the lockset by another hand to slow down the retraction speed)
(2) Find out lockset storage hole and a small concave. (See drawing P.9)
Æ
Put the lock bolt into the small concave and follow the direction of arrowhead to store the lockset (see drawing P.10)
** If the methods of storage are correct, the lockset should be placed appropriate in the storage hole. (See drawing P.11)
(3) Press the bottom again; make sure all cable line has been retracted well in the lock cassette. (See drawing P.12)
Way 1:
When the lock bolt insert in the application slot, in the mean
time the foam is surrounding the slot of application -> shake the lockset
slightly -> push down the lock button-> locked. (see blew
P.5
and
P.6
).
Way 2:
Pull out the lock set -> find an immovable article -> the
cable should be around the immovable article -> lock bolt insert in
the cassette slot (It located in a side of lock cassette) -> locked.
(see blow
P.7
and
P.8
)
。
P.7
P.5
P.6
P.8
P.10
P.12
P.11
Lockset storage hole
A small concave
P.9
Press bottom