FMC30RF User Manual
r1.3
UM015
- 9 -
4.3 Main characteristic
RF IN
LO Range
Low range option: 400MHz – 1200MHz
High range option: 1200MHz – 3000MHz
Bandwidth
60MHz (when LPF in TRF3711xx bypassed)
Input Impedance
50
Ω
Maximum Input Level
+3dBm
RF OUT
LO Range
300MHz – 4800MHz
Bandwidth
70MHz
Output Impedance
50
Ω
Full Scale Maximum Output Level
+3dBm (depending on LO frequency)
Receiver LO (RX CLK)
Output Frequency Range
Programmable trough fractional PLL (TRF3765):
300MHz to 4800MHz
Output Impedance
50Ω
Output Level
-0.5dBm typ.
Input Frequency Range
300MHz to 4800MHz
Input Impedance
High-impedance
Input Level
0dBm
Transmitter LO (TX CLK)
Output Frequency Range
Programmable trough fractional PLL (TRF372017):
300MHz to 4800MHz
Output Impedance
50Ω
Output Level
-0.5dBm typ.
Input Frequency Range
300MHz to 4800MHz
Input Impedance
High-impedance
Input Level
0dBm
External Reference Input (REF IN)
Input Level
0.2V
PP
- 3.3V
PP
Input Frequency
10MHz – 250MHz
Input Impedance
50Ω
External Reference Output (REF OUT)
Output Level
3.3V
PP
(AC coupled LVCMOS)
Output Frequency
10MHz – 250MHz
Table 2: FMC30RF daughter card main characteristics
1
Make sure minimum gain is configured, refer to section 4.2.4.
