Publication No. 500-657055-000 Rev. G
IPMI Firmware and OEM Extensions 55
B.1.6 Get ACPI Power State
This command is used to get the platform management subsystem’s power state. The firmware does not
support the ACPI power state, instead it only returns whether the board has its power turned off/on.
Table B-6 NetFn 0x06, Cmd 0x07
Byte
Value
Data Field
Comments
Request-
data
- -
Response-
data
1
00
Completion code
2
2Ah
ACPI System Power
State
[7] – reserved
[6:0] – System power
state
2Ah – unknown
The Abaco IPMI
subsystem does not
have control over the
system power.
3
XXh
ACPI Device Power
State
00h – Fully on
03h – Power off
2Ah – unknown,
power
state has not
been
initialized or
device
lost track of
power
state.
