58 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
Publication No. 500-657055-000 Rev. G
B.1.10 Set Event Receiver
This command sets the slave address and the LUN of the Event Receiver, which will receive the Event
Messages generated by the Abaco IPMI subsystem.
Table B-9 NetFn 0x04, Cmd 0x00
For a list of platform events generated by the Abaco IPMI subsystem see
.
B.1.11 Get Event Receiver
This command gets the current setting for the Event Receiver slave address and LUN.
Table B-10 NetFn 0x04, Cmd 0x01
Byte
Value
Data Field
Comments
Request-data
1
XXh
Event Receiver Slave
Address. 0FFh disables
Event message generation
[7:1] - IPMB (I
2
C) slave
address
[0] - 0
2
XXh
[7:2] – reserved
[1:0] – Event receiver LUN
Response-
data
1
00
Completion code
Byte
Value
Data Field
Comments
Request-data
-
-
Response-
data
1
XXh
Completion code
2
XXh
Event Receiver Slave
Address. 0FFh
disables Event
message generation
[7:1] - IPMB (I
2
C) slave
address
[0] - 0
3
XXh
[7:2] – reserved
[1:0] – Event receiver
LUN
