68 VMICPCI-7055/CPCI-7055RC Hardware Reference Manual
Publication No. 500-657055-000 Rev. G
B.5.3 Set Platform Event Forwarding Address
This command sets the slave address and the LUN of the Event Receiver to which the Platform Events
are forwarded.
Table B-21 NetFn 0x32, Cmd 0x80
If the forwarding address is 0 (by default, or deliberately set), events will not be forwarded.
In all cases, any Platform Events will be acknowledged back to the original sender. The VMICPCI-7055/
CPCI-7055RC should not acknowledge the forwarded event back to the IPMI controller.
Byte
Value
Data Field
Comments
Request-data
1
XXh
[7:1] – I
2
C slave
address
[0] – always 0
2
XXh
[7:2] – 0
[1:0] – LUN
Response-data 1
XXh
Completion code
