background image

 

42

 

 

User guide

 

EVOLVE Sonix 

Wireless GSM alarm

 

 
 

Thank you for buying the GSM alarm system EVOLVE Sonix. 

 

WARNING!   

This product uses the most modern technology, yet you cannot depend only on it at protecting your property. 
So, please, pay attention to the points mentioned below. The producer, importer and sellers aren´t responsible 
for any damage on the property, direct or indirect that could have occurred in connection with using this 
product, and it´s not possible to exact any compensation for potential damage from them. 
 
- The product is suitable as an 

additional securing of your property 

(house, flat, cottage, garage, garden 

house, caravan, and so on) 

- It is always recommended to use another system of securing and/or to have the particular property insured 
- The product isn´t a professional security system and it is not possible to consider it unreserved instrument for 

securing the property 

- For the right function of the product it is recommended to check it and test it by yourself at least once a 

quarter (the batteries state, the sensors and remote controls functionality, the messages sending functionality, 
the central drive functionality and others) 

- Do not forget to place the individual parts of the alarm system correctly; the installation and connection is 

convenient to entrust to the specialized technician  

 

 

    

Main unit

 

PIR sensor

 

Door / window sensor

 

Loudspeaker

 

Remote control

 

Mini siren 

Power supply

 

Summary of Contents for Evolve Sonix











Reviews: