Scorpio 1800 Installation Instructions
CLEANING INFORMATION
The Scorpio bath does not require any major maintenance, but you should follow these simple
instructions. The bath should be wiped down, preferably whilst the bath is draining, with a soft,
damp cloth.
To retain the surface quality of the bath, clean weekly using bathroom cleaning mousse or washing-up
liquid. Warm water and soft cloth is recommended. Stubborn stains may require a non-scratch liquid
cleaner.
Do not use oven cleaners, souring powders or bleach on any of the surfaces. These may spoil
the appearance of your bath.
Chalk mark deposits from the water or mild scratches may be removed from the bath surface
with a mild cutting fluid such ‘T’ Cut or Brasso. This should be applied to the affected area with
a soft cloth and rubbed vigorously until a satisfactory finish is affected. The shine to the area
may then be brought back using a wax-based polish.
WARRANTY
This product is warranted as being free from defects during the period of warranty. This does
not cover minor blemishes, etc. Which may be part of normal manufacturing processes.
The warrenty covers manufacturing defects in the products, starting from the date of supply.
The warrenty is limited to the value of the purchase price paid.
The warrenty is only valid if the product has been used correctly. Where there are any
mechanical or electrical parts, any damage, misuse or tampering with them will render the
warranty invalid. Any sealed electrical boxes must remain unopened or this will invalidate
any warranty.
The baths are not covered for any problems that may arise from the installation or site
planning unless
carried out by engineers from Abacus Healthcare.
Any consequence arising from unskilled or incorrect handling of the product is not covered
by this guarantee.
The following items, when supplied by Abacus Healthcare are guaranteed for a period of
twelve months from the date of supply for the parts only (labour costs are not covered).
Tap and mixers
Shower hoses, shower heads and shower brackets.
Flexible pipes including waste outlet, hot and cold supply
Hot and cold taps and mixer taps are proprietary fittings and as such carry a standard
manufacturer’s warranty.
Note: Thermostatic mixing vaves must be adjusted for the appropriate discharge temperature
by the installer.
These require regular maintenance for which Abacus engineers are available.
Electrical
All electrical components are CE marked to comply with current European Standards.
Electrical items must not replaced with alternative components without the authorisation of
Abacus Healthcare.
Failure to obtain such authorisation will exempt tha Company from any liabilityto action for
further failure.
THERE IS NO OTHER WARRANTY EXRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THOSE
OF MECHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE FOREGOING WARRANTY IS LIMITED TO THE TIME PERIOD SPECIFIED FROM THE TIME OF
RECEIPT. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE,
OR CONSEQUENTIAL DAMAGES
Customer Instruction Certificate
Customer Name_______________________________________________
Bath No:_____________________________________________________
Instruction given on the following:
Person Receiveing Instruction:___________________________________
Signed:______________________________
Date:________________________________
Instructed By:_________________________
Signed:______________________________
Date:________________________________
Customer Copy
14
