Abacus Pisces 069/Info.P 04/14v1a
17
CLEANING INFORMATION
The Pisces bath does not require any major maintenance, but you should follow these simple instructions.
The bath should be wiped down, preferably whilst the bath is draining, with a soft, damp cloth.
To retain the surface quality of the bath, clean weekly using bathroom cleaning mousse or washing-up
liquid. Warm water and a soft cloth is recommended. Stubborn stains may require a non-scratch liquid
cleaner.
Do not use oven cleaners, scouring powders or bleach on any of the surfaces. These may spoil the
appearance of your bath.
Chalk mark deposits from the water or mild scratches may be removed from the bath surface with a mild
cutting fluid such as 'T' Cut or Brasso. This should be applied to the affected area with a soft cloth and
rubbed vigorously until a satisfactory finish is affected. The shine to the area may then be brought back
using a wax-based polish.
Lift the platform and ensure that it is properly cleaned on its underside.
WARRANTY
This product is warranted as being free from defects during the period of warranty. This does not cover minor
blemishes, etc. which may be part of normal manufacturing processes.
The warranty covers manufacturing defects in the products, starting from the date of supply. The warranty is limited
to the value of the purchase price paid.
The warranty is only valid if the product has been used correctly. Where there are any mechanical or electrical parts,
any damage, misuse or tampering with them will render the warranty invalid. Any sealed electrical boxes must
remain unopened or this will invalidate any warranty.
The baths are not covered for any problems that may arise from the installation or site planning unless
carried out by engineers from Abacus Healthcare.
Any consequence arising from unskilled or incorrect handling of the product is not covered by this guarantee.
The following items, when supplied by Abacus Healthcare are guaranteed for a period of twelve months from the
date of supply for the parts only (labour costs are not covered).
• Taps and mixers
• Shower hoses, shower heads and shower brackets.
• Flexible pipes including waste outlet, hot and cold supply.
Hot and cold taps and mixer taps are proprietary fittings and as such carry a standard manufacturer’s warranty.
Note: Thermostatic mixing valves must be adjusted for the appropriate discharge temperature by the installer.
These require regular maintenance for which Abacus engineers are available.
• Electrical
All electrical components are CE marked to comply with current European Standards.
Electrical items must not be replaced with alternative components without the authorisation of Abacus Healthcare
Failure to obtain such authorisation will exempt the Company from any liability to action for further failure.
THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE FOREGOING WARRANTY IS LIMITED TO THE TIME PERIOD SPECIFIED FROM THE TIME OF RECEIPT. IN NO EVENT
SHALL THE SUPPLIER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES INCLUDING
BUT NOT LIMITED TO; LOSS OF USE.
WHILE THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH
THIS WARRANTY DOES NOT EXCLUDE YOU FROM.
CARE IN BATHING LTD. OPERATES A POLICY OF CONTINUOUS PRODUCT DEVELOPMENT AND RESERVES THE RIGHT TO
CHANGE SPECIFICATIONS AND DESIGNS WITHOUT PRIOR NOTICE SO LONG AS THEY DO NOT MATERIALLY ALTER THE
FUNCTION OF THE BATH.
