38
|
MAINTENANCE
Maintenance
Drain the water in the
RO
M10H20
CAT
unit
When you need to move the unit or do not use it for a long period of time, you should drain
the water inside the unit.
Clean the water tank pre-filter
The function of the pre-filter of the external water tank is to perform
a first filtering and isolate the larger particles present in the water.
Cleaning with an interval of 4-6 months is recommended, depending
on the quality of the potable water supplied to the unit.
Cleaning method
Take the pre-filter out of the outer water tank, wash it thoroughly
under the tap and scrub it with a soft cleaning brush. Put it back in
place inside the outer water tank.
Drain screw cap
Drain screw cap
Rubber drain plug
Unscrew the drain cap on the back of the unit and
remove the rubber plug. Then slightly tilt the unit
until it is completely drained of water.
Empty the interior of water.
Drain the water from the tank, dry it
and put it back in the unit..
Install the rubber plug and screw
on the drain cap.
