|
41
Starting the cleaning program
After replacing the filters turn the unit on. Press
and hold the “Get Water” and “Temp/Child Lock”
buttons on the control panel at the same time
for 5 seconds, the cleaning light will come on
and the water change and circulation light will
flash simultaneously to indicate that automatic
cleaning has started. This process will have a
total duration of approximately 1-2 hours.
Starting the cleaning program with the
external tank
Remove the outer tank from the unit, empty the
residual water from it and clean it thoroughly,
put the outer tank back into the unit and fill it
to its maximum capacity with potable water, it
is strongly recommended that for this cleaning
process, the tank is filled with 2 liters edible
white vinegar, the automatic cleaning of the
unit will be much more effective.
The light “ ” on the control panel will go out,
the running light “
” will continue to light.
The unit will start automatic cleaning for
approximately 1-2 hours.
Press at the same time and hold for 5 seconds.
Get
Water
Temp
Child lock
2
3
Remove the filter as indicated in the
photo, turn gently to the left and
scroll down.
Insert the new filter by moving it
upwards and gently turn to the
right.
MAINTENANCE
