The trampoline's user manual is also available at www.abarqs.pl.
7
STEP 3– INSTALATION OF THE TRAMPOLINE MAT
Be careful when installing the springs. To carry out the instructions in this part of
the manual, you need the help of another
A.
Unfold the trampoline mat (1) inside the frame. Safety instructions
should be on the instructions should be on the
B.
Using a spring tensioning tool Step 1: Note that the spring has two
different hooks. We mount the spring to the V shaped ring at the mat
using a more rounded spring hook.
Using the spring assembly device (9), tension the spring and the end hook the
spring into the appropriate hole on the frame
C.
The figure below shows the correct spring assembly sequence.
D.
The springs are mounted in pairs. Every time you install the first spring,
the second should be on the opposite side of the mat. Even voltage
distribution of the mat during installation is very important.
STEP 4 - INSTALLATION OF THE RACK COVER
Unfold the rack cover (2) as shown and then fix it to the frame with cords (see picture).
