ABB Robotics IRB 1520 Product Manual Download

Page: 111 / 310

Note

Action

CAUTION

The gearbox can contain an

excess of

pressure

that can be hazardous. Open the

oil plug carefully in order to let out the ex-
cess pressure.

Open the oil plug at the end of the hose and
place the hose end at the oil collecting
vessel to collect the oil.

See

Location of oil plugs on page 108

Note

Draining is time-consuming.
Elapsed time varies depending on the
temperature of the oil.

Open the oil plug for filling and use com-
pressed air to accelerate the process. Max-
imum pressure allowed: 10 kPa.

WARNING

Used oil is hazardous material and must be
disposed of in a safe way. See section

De-

commissioning on page 285

for more inform-

ation.

Note

There will be some oil left in the gearbox
after draining.

See

Required equipment on page 109

Refit the

oil plugs

Tightening torque: 10 Nm

Fasten the oil draining hose inside the base
with straps.

Refit the base cover.

Refit the centering piece to the push button
unit.

Refit the push button guard to the base.

Continues on next page

Product manual - IRB 1520

111

3HAC043435-001 Revision: L

3 Maintenance

3.4.2 Changing the oil, axis 1 gearbox

Continued

Summary of Contents for IRB 1520






















































































































































































































































































































Search results

Summary of Contents for IRB 1520

Reviews:

Related manuals for IRB 1520

Brands by name

Popular brands

ABB Robotics IRB 1520, Product Manual

Search results

Summary of Contents for IRB 1520

Reviews:

Related manuals for IRB 1520

Brands by name

Popular brands