ABB 265DS Operating Instruction Download

Page: 69 / 88

Technical

data

IM/265D/V-EN-02 265Dx,

265VS

Static pressure

The 265Dx transmitter operates within the specifications with the
following limits:

265Dx transmitter

Static pressure

Silicone oil for sensor

code A

3.5 kPa abs., 35 mbar abs., 0.5 psia
up to
0.6 MPa, 6 bar, 87 psi

Carbon fluoride for

sensor code A

40 kPa abs., 400 mbar abs., 5.8 psia
up to
0.6 MPa, 6 bar, 87 psi

Silicone oil for sensor

code C ... R

3.5 kPa abs., 35 mbar abs., 0.5 psia
up to
16 MPa, 160 bar, 2,320 psi, or
25 MPa, 250 bar, 3,625 psi, or
41 MPa, 410 bar, 5,945 psi
depending on code variant selected

Carbon fluoride for

sensor code C ... R

40 kPa abs., 400 mbar abs., 5.8 psia
up to
16 MPa, 160 bar, 2,320 psi, or
25 MPa, 250 bar, 3,625 psi, or
41 MPa, 410 bar, 5,945 psi
depending on code variant selected

265Vx transmitter

Static pressure

Sensor code F ... N

Absolute 0
up to
16 MPa, 160 bar, 2,320 psi, or
25 MPa, 250 bar, 3,625 psi, or
41 MPa, 410 bar, 5,945 psi
depending on code variant selected

Pos: 23.18 /Technische Daten / Datenblatt/Druck/Druckmessumformer/265Dx, 265Vx/Prüfdruck @ 5\mod_1164883271046_3101.doc @ 49561

Test pressure

For pressure testing purposes, the 265Dx transmitter can withstand a
pressure test (applied simultaneously at both sides) of up to 1.5 times
the nominal pressure (static pressure range) of the transmitter
(265Vx up to max. 1.0 x nominal pressure).

Pos: 23.19 /==== Wechsel zwei- auf einspaltig ==== @ 0\mod_1130421955859_3101.doc @ 3829

Change from one to two columns

Pos: 23.20 /==== Leeres Modul mit zwei Absatzmarken, DS, 1-spaltig ==== @ 3\mod_1159257408468_0.doc @ 42813

Pos: 23.21 /Überschriften/1.1/2-spaltig/G - I/Grenzwerte für Einflüsse der Umgebung @ 1\mod_1148983063968_3101.doc @ 27538

10.3 Environmental limits

Pos: 23.22 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828

Change from one to two columns

Pos: 23.23 /Technische Daten / Datenblatt/Druck/Druckmessumformer/265Dx, 265Vx/Grenzwerte für Einflüsse der Umgebung @ 5\mod_1164883596468_3101.doc @ 49582

Electromagnetic compatibility (EMC)

Conforms to the requirements and tests for
EMC Directive 89/336/EC, as well as to EN 61000-6-3 concerning
emitted interference and EN 61000-6-2 concerning interference
immunity.
Meets NAMUR recommendations.

Low Voltage Directive

Complies with 73/23/EC.

Pressure Equipment Directive (PED)

Instruments with a maximum operating pressure of 25 MPa, 250 bar,
3,625 psi, or 41 MPa, 410 bar, 5,945 psi, comply with Directive
97/23/EC Category III, module H.

Humidity

Relative humidity:

Up to 100 %

Condensation, icing:

Permissible

Vibration resistance

Acceleration up to 2 g at frequencies up to 1,000 Hz (according to
IEC 60068-2-6).

Shock resistance (acc. to IEC 60068-2-27)

Acceleration: 50

Duration: 11

Protection type (humid and dusty atmospheres)

The transmitter is dust and sand-tight, and is protected against
immersion effects as defined by the following standards:
•