364Ax-Gx Instruction Manual
37
Digital LCD Integral Display view setting
To view the menu in a specific language:
Navigate the Digital LCD Integral Display menu, select
Display
>
Language
, and the used language will be
available. To modify select
Edit
then scroll the desired language with the up and down keys and confirm with
OK
.
)
Digital LCD Integral Display Keys sequence to set the language: 3 – 1 – Edit
To modify the Operator view:
Navigate the Digital LCD Integral Display menu, select
Display
>
Operator View
, and the used view will be
available. To modify select
Edit
then scroll the desired Operator view (see the following table) with the up
and down keys and confirm with
OK
.
One Line
to view the Variable 1 as defined in the Display
One Line + Bargraph
to view the Variable 1 as defined in the Display and the Bargraph
proportional with the variable full scale
Two Lines
to view the Variable 1 and the Variable 2 as defined in the Display
Two Lines + Bargraph
to view the Variable 1 and the Variable 2 as defined in the Display
and the Bargraph proportional with the variable full scale
)
Digital LCD Integral Display Keys sequence to modify the Operator View: 3 – 2 – Edit
To define the Variable 1 in the Display:
Navigate the Digital LCD Integral Display menu, select
Display
>
Display Variable 1
, and the used varia ble
will be available. To modify select
Edit
then scroll the desired Variable 1 view (see the following table) with
the up and down keys and confirm with
OK
.
Pressure
to view the Primary Variable value
Output %
to view th Primary Variable in percentage
Current Out
to view the current Output value in mA
Engineering Output
to view the Output value in Engineering Units
Sensor Temperature
to view the Sensor Temperature value
)
Digital LCD Integral Display Keys sequence to modify the define the Variable 1: 3 – 3 – Edit
To define the Variable 2 in the Display:
Navigate the Digital LCD Integral Display menu, select
Display
>
Display Variable 2
, and the used varia ble
will be available. To modify select
Edit
then scroll the desired Variable 2 view (see the following table) with
the up and down keys and confirm with
OK
.
Pressure
to view the Primary Variable value
Output %
to view th Primary Variable in percentage
Current Out
to view the current Output value in mA
Engineering Output
to view the Output value in Engineering Units
Sensor Temperature
to view the Sensor Temperature value
)
Digital LCD Integral Display Keys sequence to modify the define the Variable 2: 3 – 4 – Edit
To define the Bargraph variable in the Display:
Navigate the Digital LCD Integral Display menu, select
Display
>
Display Bargraph
, and the used variable in
the Bargraph will be available. To modify select
Edit
then scroll the desired Variable with the up and down
keys for the Bargraph view (see the following table) and confirm with
OK
.
Pressure
to view the Primary Variable value
Output %
to view th Primary Variable in percentage
Current Out
to view the current Output value in mA
Engineering Output
to view the Output value in Engineering Units
Sensor Temperature
to view the Sensor Temperature value
)
Digital LCD Integral Display Keys sequence to modify the define the Bargraph variable: 3 – 5 – Edit
