364Ax-Gx Instruction Manual
38
To regulate the Display Contrast:
Navigate the Digital LCD Integral Display menu, select
Display
>
Contrast
, and the used contrast will be
available. To modify the contrast use the up and down keys and confirm with
OK
.
)
Digital LCD Integral Display Keys sequence to modify the define the Bargraph variable: 3 – 6
To define the Variable Engineering Units in the display:
Navigate the Digital LCD Integral Display menu, select
Display
>
Display Settings > Display Eng. Unit
, and
the possible engineering variables will be available. To select the type push
Edit
and sel ect with up a nd
down keys; confirm with
OK
.
Pressure
Temperature
Level
Other
Custom Unit
The in-use unit for the type will be available. To modify select
Edit
then scroll the desired Unit with the up
and down keys and confirm with
OK
.
)
Digital LCD Integral Display Keys sequence to modify the define the Variable Engineering Units in the display: 3 – 7 - 1
To protect the Display from changes:
Navigate the Digital LCD Integral Di splay menu, sel ect
Display
>
Security > Display Protection
, and th e
actual protection will be available (Unlock and Lock). To modify select
Edit
then scroll the desired protection
with the up and down keys and confirm with
OK.
)
Digital LCD Integral Display Keys sequence to protect the Display: 3 – 8 – 1 – Edit
To change the Display Password:
The Display Password is a five digit string. The default value, at the transmitter delivery is
. This
default password does not give the possibility to lock
Navigate the Digital LCD Integral Display menu, sel ect
Display
>
Security > Cha nge Password
, and the
current password will be available. To modify select
Edit
then scroll the desired alphanumeric symbol with
the up and down keys and confirm with
Next.
Repeat the operation for the five digits and confirm with
OK.
)
Digital LCD Integral Display Keys sequence to change the Display password: 3 – 8 – 2 – Edit
HART Transmitter
Accessing Communication data
The Operation data access could be necessary to look or verify the transmitter configuration.
Accessing Communication data by Digital LCD Integral Display
To access the transmitter communication data:
Navigate the Digital LCD Integral Display menu, select
Communication,
scroll the submenu with the up and
down keys
select one of the following submenu:
Hart Tag
to view e modify the transmitter Tag
Descriptor
to view e modify the transmitter Descriptor
Message
to view e modify the transmitter Message
Polling Address
to view the polling address
To modify select
Edit
then scroll the desired alphanumeric symbol with the up and do wn keys and confirm
with Next. Repeat the operation for the necessary digits and confirm with OK
)
Digital LCD Integral Display Keys sequence to access the transmitter communication data: 5
