ABB 6X1ED, Instructions Manual

- 1 -

Health and Safety

To ensure that our products are safe and without risk to health, the following points must be noted:

1. The relevant sections of these instructions must be read carefully  before proceeding.

2. Warning labels on containers and packages must be observed.

3. Installation, operation, maintenance and servicing must only be carried out by suitably trained personnel and in accordance with the

information given. Any deviation from these instructions, will transfer the complete liability, to the user.

4. Normal safety precautions must be taken to avoid the possibility of an accident occurring when operating in conditions of high

pressure and/or temperature.

5. Chemicals must be stored away from heat, protected from temperature extremes and powders kept dry. Normal safe handling

procedures must be used.

6. When disposing of chemicals ensure that no two chemicals are mixed.

Safety advice concerning the use of the equipment described in this manual or any relevant hazard data sheets (where applicable)  may
be obtained from the Company address on the back cover, together with servicing and spares information.

Use of Instructions

Warning.

An instruction that draws attention to the risk of injury or

death.

Caution.

An instruction that draws attention to the risk of damage

to the product, process or surroundings.

Although 

Warning 

hazards are related to personal injury, and 

Caution 

hazards are associated with equipment or property

damage, it must be understood that operation of damaged equipment could, under certain operational conditions, result in
degraded process system performance leading to personal injury or death. Therefore, comply fully with all 

Warning 

and

Caution 

notices.

Information in this manual is intended only to assist our customers in the efficient operation of our equipment. Use of this manual
for any other purpose is specifically prohibited and its contents are not to be reproduced in full or part without prior approval
of Technical Communications Department, ABB Automation.

✶

Note.

Clarification of an instruction or additional information.

Information.

Further reference for more detailed information or

technical details.

SAFETY INSTRUCTIONS FOR PRESSURE TRANSMITTERS

MODELS 6X1ED - EE - EH - EG - EA, 622ED, 6X1ES

R

E

G

IS

T E R E D

 F

IR

M

BS EN ISO 9001

St Neots, U.K. – Cert. No. Q5907
Stonehouse, U.K. – Cert. No. FM 21106

Stonehouse, U.K. – Cert. No. 0255

UNI EN ISO 9001

Lenno, Italy – Cert. No. 9/90A

DIFFERENTIAL PRESSURE TRANSMITTERS

ENGLISH