Operation Manual / 4 Product description / A100-L
Tables
Page 113 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4034_EN
Revision H
November 2016
Tables
Table 1 Related documents ................. 5
Table 2 A100-L Weights ....................... 11
Table 3 General information about
fastening the turbocharger ...... 14
Table 4 Tightening torques (foot
screws) .................................... 15
Table 5 Tightening angle (foot screws) 15
Table 6 Lubricating oil pressure, oil
inlet .......................................... 21
Table 7 Lubricating oil temperature at
the inlet .................................... 21
Table 8 Lubricating oil temperature at
the outlet .................................. 22
Table 9 Tightening torques (86505) ..... 25
Table 10 Expected replacement inter-
vals for turbocharger parts ...... 34
Table 11 Recommended replacement
intervals for turbocharger parts 34
Table 12 Volume of water per cleaning
process .................................... 45
Table 13 Tightening torques (81125) ..... 45
Table 14 Amount of granulate ................ 49
Table 15 Malfunctions when starting –
Delayed start-up ...................... 51
Table 16 Malfunctions when starting –
Vibrations ................................ 51
Table 17 Malfunctions when starting –
Rubbing of rotating parts ......... 51
Table 18 Malfunctions during operation
– Lubricating oil pressure too
low ........................................... 52
Table 19 Malfunctions during operation
– Speed reductions .................. 52
Table 20 Malfunctions during operation
– Exhaust gas temperature too
high .......................................... 53
Table 21 Malfunctions during operation
– Charge air pressure too low . 53
Table 22 Malfunctions during operation
– Charge air pressure too high 54
Table 23 Surging of the turbocharger ..... 54
Table 24 Malfunctions when stopping -
noises during run-down ........... 55
Table 25 Malfunctions when stopping -
run-down time shortened ........ 55
Table 26 Malfunctions of the speed
measurement system .............. 56
Table 27 Weights of assemblies [kg] ..... 59
Table 28 Weight of wall insert [kg] ......... 59
Table 29 Tightening torques (filter si-
lencer screws) ......................... 64
Table 30 Admissible axial clearance A .. 71
Table 31 Tightening torque (56014) ....... 77
Table 32 Tightening torque (61009) ....... 78
Table 33 Tightening torque (56014) ....... 81
Table 34 Tightening torque (61009) ....... 82
Table 35 Admissible axial clearance A .. 83
Table 36 Tightening torque (77015) ....... 84
Table 37 Tightening torque (72011) ....... 86
Table 38 Tightening torque (72004) ....... 87
Table 39 Tightening torques (72004,
74043) ..................................... 88
Table 40 Overview of tightening torques 91
Table 41 Tightening torque, insulation ... 91
Table 42 Procedure for taking out of
operation ................................. 93
Table 43 Tightening torque (locking
device) .................................... 95
Table 44 Required washers (01) ............ 96
Table 45 Tightening torque (57005) ....... 96
Table 46 Customer spare part set
(97070) .................................... 105
Table 47 Turbocharger with part num-
bers ......................................... 107
Table 48 Cartridge group with part
numbers .................................. 109
