background image

 

 

ABB-free@home

®

 

 

02  Performance Features

 

 

 

 

 
 
System Manual 

5

 

02 Performance Features 

The free@home system is a twisted-pair-based bus system for home automation. It 
enables the control and automation of lighting, heating, and blinds and also provides 
integration of the ABB-Welcome door communication system. 

 

Control takes place on site using permanently installed 
control elements or mobile using a smartphone or tablet.  

Functions are allocated only by software; i.e., if the use of 
a room changes in future, the function of the light switch 
can be easily changed, as well.  

No special software is required for commissioning. Con-
figuration takes place using the available Internet browser 
of the computer, or the free free@home app for 
smartphones or tablets (Android/iOS).  

A free@home system is made up of the following devices: 

» 

a System Access Point, 

» 

a power supply, 

» 

sensors for local operation, 

» 

actuators for switching loads.  

Performance features 

Up to 64 devices can be installed in a system  
(power supply is not included).  

The following versions of devices are available: 

System devices  

» 

System Access Point 

» 

Power supply 

Sensors 

» 

Control elements 

» 

Panels 

» 

Binary inputs 

» 

Room temperature controller  

» 

Movement detector  

Actuators 

» 

Switch actuators 

» 

Dimming actuators 

» 

Blind actuators 

» 

Heating actuators 

 

Sensors and actuators are each available in construction 
types 

flush-mounted

flush mounted pill

 and 

rail-

mounting (MDRC)

 and can be combined as required 

according to application.  

The web-based user interface of the System Access Point 
can be called up and operated simultaneously by several 
participants (computers and/or mobile devices with the 
free@home app). This can, depending on the changes 
made, lead to losses in performance (the changes take 
longer to implement). That is why it is recommended to 
operate the user interface with only 4 participants at the 
same time. 

 

 

Summary of Contents for ABB-free home













































































Reviews: