Section 1 Safety Operator Warnings
S800 I/O Getting Started, 3BSE020923*
2PAA110888-600 - Warnings based on 3BNP004865-600 RevA
25
S800 I/O Getting Started, 3BSE020923*
W
Warnings
This section lists the warnings mentioned in the S800 I/O Getting Started manual.
Electrostatic Sensitive Device
Devices labeled with this symbol require special handling precautions as described
in the installation section.
Equipment Environment
All components, whether in transportation, operation or storage, must be in a
noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with energized parts is
avoided when servicing.
Hazardous Location - North American Approval (cULus)
Explosion hazard! Do not disconnect equipment unless power has been removed or
the area is known to be non-hazardous.
Explosion hazard! Substitution of components may impair suitability for Class 1
Zone 2 and Class 1 Division 2.
Explosion hazard! Do not replace batteries unless power has been switched off or
the area is known to be non-hazardous.
Explosion hazard! Do not remove fuses unless the area is known to be non-
hazardous.
Safety Regulations - Personnel Safety
Work with care when supply voltage is applied to the system. Voltages within the
cabinet can cause serious injury or death.
