background image

19

4.7 RoHS 3 Compliance

The product, including all its components and its sub-assemblies, have been manufactured in 
compliance with the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 
on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

C ER T I FI C AT I O N S

4 Norms and certifications

4.8 REACH Compliance

The product is certified according to the REACH Directive, taking in account Substances of Very High 
Concern (SVHC), as specified in the list published by ECHA (European Chemical Agency) at the time of  
the design.

4.9 WEEE Compliance

In compliance with the Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 
on waste electrical and electronic equipment (WEEE), the symbol on the left, shown on the product or 
within its literature, indicates separate collection for electrical and electronic equipment (EEE) that has 
been placed on the market after 2005.
The product, at the end of its life cycle, must be collected separately and managed in accordance with the 
provisions of the current Directive on waste of electrical and electronic equipment.

Because of the substances present in the product, improper disposal can cause damage to human health 
and to the environment.
To avoid any possible legal implications, contact your local waste collection body for full collect and 
recycling information.

Summary of Contents for Ability Naveo Pro GW 1.0





































Reviews: