Management software in the "Smart Access Point Pro"
System Manual 2CKA001473B5074
│105
5.3.2
Add "Electronic cylindrical lock"
To add a "Electronic cylindrical lock", perform the following steps:
Fig. 90: Add "Electronic cylindrical lock"
1. Click on the "Cylinder" button [1].
Fig. 91: Enter "Electronic cylindrical lock" data
2. Enter the name of the "Electronic cylindrical lock" in field [1].
3. Assign the "Electronic cylindrical lock“ to the building structure [2] (building, floor, room).
– The assignment to the building structure can also be made later, see chapter 5.2
“Building structure“ on page 95.
4. Enter the serial number [3] of the "Electronic cylindrical lock".
– The serial number is located on the type plate in the battery compartment, see chapter
3.2.1 “"Electronic cylindrical lock"“ on page 51.
5. Click on the "Save" button.