Management software in the "Smart Access Point Pro"
System Manual 2CKA001473B5074
│111
5.3.5
Add "RF Repeater"
To add a "RF Repeater", perform the following steps:
Abb. 99: Add "RF Repeater"
1. Click on the "RF Repeater" button [1].
2. Click on the "Add user" button [2].
Fig. 100: "RF Repeater" characteristics
3. Enter the name of the "RF Repeater" in field [1].
4. Assign the "RF Repeater" to the building structure [2] (building, floor, room).
– The assignment to the building structure can also be made later, see chapter 5.2
“Building structure“ on page 95.
