ACH580 Installation, Operation and Maintenance Manual
57
ACH580-01 Installation
2
Select
Motor
and press
(
Select
) (or ).
3
If the control modes is scalar, select
Control mode
and
press
(
Select
) (or ) and continue to the next step.
4
Select
Vector control
and press
(
Select
) (or ).
5
Warning message
Identification run
is shown for a
moment.
6
Check the motor speed limits. The following must be true:
Minimum speed < 0
rpm
Maximum speed = motor rated speed.
7
Check the motor current as well as torque limits. The
following must be true:
Maximum current >
I
HD
Maximum torque > 50%.
ACH580_Inst_Op_Maint_Rev G.book Page 57