15
Refer to the motor or pump nameplate for the following nominal value settings of the motor.
Enter the values exactly as shown on the motor or pump nameplate.
Example of a nameplate of an induction (asynchronous) motor:
Check that the motor data is correct. Values are predefined on the
basis of the drive size but you should verify that they correspond to
the motor.
Go to the edit view of a selected row by pressing .
• Scroll the view with and .
Press
(
Next
) to continue.
Adjust the limits according to your needs.
• Go to the edit view of a selected row by pressing .
• Scroll the view with and .
Go to the next view by pressing
(
Next
).
If you want to set up irrigation process settings, select Yes and press
(Next)
.
If you do not want to set up irrigation process settings, select Exit to
hand mode
and press
(Next)
.
Select pump type;
Submersible/Turbine
or
Boost Pump
and press
(Next)
.
ABB Motors
3 ~
motor
M2AA 200 MLA 4
IEC 200 M/L 55
No
Ins.
cl.
F
IP
55
V Hz kW r/min A cos
ij,$,1
tE/S
690 Y
400 D
660 Y
380 D
415 D
440 D
Cat. no
50
50
50
50
50
60
30
30
30
30
30
35
1475
1475
1470
1470
1475
1770
32.5
56
34
59
54
59
0.83
0.83
0.83
0.83
0.83
0.83
6312/C3
6210/C3
180 kg
IEC 34-1
3GAA 202 001 - ADA
