3BHS212794 E01 REV M
ACS6000
USER MANUAL
27/278
1.
About this manual
1.1
Equipment covered by this manual
This manual covers standard drive and provides generic information on
the drive. The manual does not claim to cover all variations and details of
the drive, nor to consider all eventualities that may arise during
installation, commissioning, operation and maintenance of the drive.
If the drive is adapted to specific customer needs or applications, and
handling, installation, and operation of the drive are affected by these
modifications, information on these modifications is provided in the
appropriate documentation (such as layout drawings, wiring diagrams,
project-specific data, engineering notes).
If information is required beyond the instructions in this manual, refer the
matter to ABB.
1.2
Structure of the user documentation
The complete set of user documentation of a standard drive consists of
this manual and supplementary documentation that is provided in the
following appendices:
• Appendix A - Additional manuals:
provides manuals about additional
equipment delivered with the drive (such as project-specific
options such as pulse encoder or fieldbus interfaces), or
information on modifications of the standard drive.
• Appendix B - Technical data:
contains the technical data sheets of
the drive.
• Appendix C - Mechanical drawings:
provides the outline drawings of
the drive. The drawings are generated according to the customer-
specific project.
• Appendix D - Wiring diagrams:
contains the circuit diagrams with
information on device identification, cross-reference and device
identification conventions. The diagrams are generated according
to the customer-specific project.
Note:
“Setting of protective devices” is generated according to the
customer-specific project.
• Appendix E - Parts list:
produced for each project and contains all
information to identify a component.
• Appendix F - Test reports and certificates:
provides the test reports
of the drive. Quality certificates, and codes and standards the drive
complies with are added if necessary for the project.
• Appendix G - Signal and parameter table:
includes descriptions of
actual signals, control and status words, and control parameters
and their default settings.
