9
7
6b
6a
8
11
9. Install the hood. First position the front edge carefully, then
press the hood downwards until it snaps on.
7. Install the gland box cover.
8. Fasten the cover with three M4×16 screws.
6. Replace the original terminal cover (6a) with new terminal
cover (6b) (included in the delivery). If using MTAC-01 option
module, remove a detachable part (shown in the picture) from
terminal cover.
11
10
ABB Oy Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: www.abb.com
10. Fasten the hood to drive with two M3×12 screws.
11. Fasten the hood to wall with one M4 screw (not included).
12. Drive with MUL1-R4 option installed.
