22 Introduction to the manual
Contents of this manual
The manual consists of the following chapters:
•
(page
) gives safety instructions you must follow when installing,
commissioning, operating and servicing the drive.
•
(this chapter, page
) describes applicability, target
audience, purpose and contents of this manual. It also contains a quick
installation and commissioning flowchart.
•
Operation principle and hardware description
(page
) describes the operation
principle, layout, power connections and control interfaces, type designation label
and type designation information in short.
•
) tells how to check the installation site, unpack,
check the delivery and install the drive mechanically.
•
Planning the electrical installation
(page
) tells how to check the compatibility of
the motor and the drive and select cables, protections and cable routing.
•
(page
) tells how to check the insulation of the assembly
and the compatibility with IT (ungrounded) and corner-grounded TN systems as
well as connect power cables and control cables.
•
(page
) contains a checklist for checking the mechanical
and electrical installation of the drive.
•
Start-up, control with I/O and ID run
(page
) tells how to start up the drive as
well as how to start, stop, change the direction of the motor rotation and adjust the
motor speed through the I/O interface.
•
(page
) describes the control panel keys, LED indicators and
display fields and tells how to use the panel for control, monitoring and changing
the settings.
•
(page
) gives a brief description of each application macro
together with a wiring diagram showing the default control connections. It also
explains how to save a user macro and how to recall it.
•
(page
) describes program features with lists of related user
settings, actual signals, and fault and alarm messages.
•
(page
) describes actual signals and
parameters. It also lists the default values for the different macros.
•
Fieldbus control with embedded fieldbus
(page
) tells how the drive can be
controlled by external devices over a communication network using embedded
fieldbus.
•
Fieldbus control with fieldbus adapter
(page
) tells how the drive can be
controlled by external devices over a communication network using a fieldbus
adapter.
•
(page
) tells how to reset faults and view fault history. It lists all
alarm and fault messages including the possible cause and corrective actions.
•
Maintenance and hardware diagnostics
) contains preventive
Summary of Contents for ACS355 series
