ACS580-0P 3R Irrigation Packaged Drive
9
Installation
Preparing for Installation (Supplement to ACS580-01 User’s Manual)
Drive Identification
To identify the type of device you are installing, refer to the type code number on the
device identification label.
• Wall mounting base drives – label attached on the side surface of the heat sink.
• Packaged drive – label attached to outside surface on the left side of the
enclosure.
• Enclosure with hinged cover/door – label on inside surface of the cover/door.
Type Code Number
Use the following to interpret the type code found on the identification label.
ACS580-0P-124A-4 +C192
AC Drive = 580 Product Series
Construction
0P = Drive with disconnect switch
Output current rating
(See ratings chart for details)
Voltage rating
2 = 208/230 VAC
4 = 460 VAC
Enclosure protection class
+C192 = 3R Irrigation Drive
Ratings and Frame Size
Charts in the “Ratings”
sections of the ACS580-01 User’s Manual and this manual list
technical specifications, and identify the drive’s frame size.
Note!
Some instructions in this document vary, depending on the drive’s frame size.
To read the Ratings table, you need the “Output current rating” entry from the type
code (see above).
Suitable Mounting Location
For selecting a suitable mounting location for configurations, refer to:
•
Preparing for installation in the ACS580-01 User’s Manual, and
• The Technical Data section of this manual for information on dimensions, weights
and free space requirements.
