Implementing the emergency stop function
You can order the drive with a category 0 or category 1 emergency stop function.
For safety reasons, install the emergency stop devices at each operator control station and
at other operating stations where emergency stop may be needed.
Note:
Pressing the stop key
on the control panel of the drive, or turning the operating switch of
the drive from position “1” to “0” does not generate an emergency stop of the motor or
separate the drive from dangerous potential.
See the appropriate emergency stop user’s manual for the wiring, start-up and operation
instructions.
Manual code
(English)
User’s manual
Option
code
Emergency stop, stop category 0 (using main contactor/breaker)
+Q951
Emergency stop, stop category 1 (using main contactor/breaker)
+Q952
Emergency stop, stop category 0 (using Safe torque off)
+Q963
Emergency stop, stop category 1 (using Safe torque off)
+Q964
Emergency stop, stop category 0 or 1 (using main contactor/breaker and Safe
torque off)
+Q978
Emergency stop, stop category 0 or 1 (using Safe torque off)
+Q979
Implementing the Safe torque off function
See chapter Safe torque off function.
Implementing the Prevention of unexpected start-up
function
The drive can be equipped with a Prevention of unexpected start-up (POUS) function.
The POUS function enables short-time maintenance work (like cleaning) on the non-electrical
parts of the machinery without switching off and disconnecting the drive.
See the appropriate user’s manual for the wiring, start-up and operation instructions.
Manual code
(English)
User’s manual
Option
code
Prevention of unexpected start-up, with FSO-xx safety functions module
+Q950
Prevention of unexpected start-up, with safety relay
+Q957
Implementing the functions provided by the FSO-xx safety
functions module (Q972 or +Q973)
The drive can be equipped with an FSO-xx safety functions module (Q972 or +Q973)
which enables the implementation of functions such as Safe brake control (SBC), Safe stop
1 (SS1), Safe stop emergency (SSE), Safely limited speed (SLS) and Safe maximum speed
(SMS).
Guidelines for planning the electrical installation 89
Summary of Contents for ACS880-07
