Fault tracing
216
0062
D2D SLOT COMM
(0x7584)
Drive-to-drive link is set to use
an FMBA module for
communication, but no module
is detected in specified slot.
Check the settings of parameters
and
. Ensure
that the FMBA module has been detected by
checking parameters
…
Check that the FMBA module is correctly
wired.
Try installing the FMBA module into another
slot. If the problem persists, contact your local
ABB representative.
0201
T2 OVERLOAD
(0x0201)
Firmware time level 2 overload
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0202
T3 OVERLOAD
(0x6100)
Firmware time level 3 overload
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0203
T4 OVERLOAD
(0x6100)
Firmware time level 4 overload
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0204
T5 OVERLOAD
(0x6100)
Firmware time level 5 overload
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0205
A1 OVERLOAD
(0x6100)
Application time level 1 fault
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0206
A2 OVERLOAD
(0x6100)
Application time level 2 fault
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0207
A1 INIT FAULT
(0x6100)
Application task creation fault
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0208
A2 INIT FAULT
(0x6100)
Application task creation fault
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0209
STACK ERROR
(0x6100)
Drive internal fault
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0210
FPGA ERROR
(0xFF61)
Drive internal fault
Note:
This fault cannot be
reset.
Contact your local ABB representative.
0301
UFF FILE READ
(0x6300)
File read error
Note:
This fault cannot be
reset.
Contact your local ABB representative.
Code
Fault
(fieldbus code)
Cause
What to do
Summary of Contents for ACSM1 Series
