AquaMaster 3 FET200
Electromagnetic flowmeter Transmitter
1 Safety
4
OI/FET200–EN Rev. I
1.3 Health & Safety
Health and Safety
To ensure that our products are safe and without risk to health, the following points must be noted:
The relevant sections of these instructions must be read carefully before proceeding.
Warning labels on containers and packages must be observed.
Installation, operation, maintenance and servicing must only be carried out by suitably trained
personnel and in accordance with the information given.
Normal safety precautions must be taken to avoid the possibility of an accident occurring when
operating in conditions of high pressure and / or temperature.
Chemicals must be stored away from heat, protected from temperature extremes and powders
kept dry. Normal safe handling procedures must be used.
When disposing of chemicals ensure that no two chemicals are mixed.
Safety advice concerning the use of the equipment described in this manual or any relevant hazard
data sheets (where applicable) may be obtained from the Company contact details on the back cover,
together with servicing and spares information.
Warning.
Installation and maintenance must be carried out only by suitably trained personnel.
Read all relevant sections of this manual before selecting a location.
The safety requirements of this equipment, any associated equipment and the local environment
must be taken into consideration during installation.
Install and use this equipment in accordance with relevant national and local standards.
Specific safety precautions apply to the use of the GSM engine that forms part of the
GSM-equipped version of this product. If the unit purchased has GSM-capability, read
Appendix A on page 39 before selecting a location.
