Section 10
Service configuration
10.1
Configuring services
1.
In the left pane, click
Services
.
The service categories are listed under
Services
.
2.
Click a service category.
3.
Configure the service with the service parameters listed in the view.
4.
Click
Submit
to save the settings.
10.2
Service parameters
Table 23:
Common
Name
Description
Value range
Common
Services
Use DNS
Proxy
Determines if the device acts as a DNS server for LAN devices
No, Yes
LLMNR
responder
The link-local multicast name resolution is a protocol that enables
machines on LAN to find the device using its hostname. By default,
the device uses its hostname (for example, arctic-02xxyy).
No, Yes
mDNS
responder
The multicast domain name system is a protocol that enables
Mac® OS X® machines on LAN to find the device using its
hostname (for example, arctic-02xxyy).
No, Yes
SSH Server
The SSH (secure shell) is an encrypted network protocol for safe
remote command line connections. It is replacing the Telnet
protocol.
SSH Server
Determines if logging into the device using SSH is allowed. The
device has internal SSH server, which allows incoming SSH
connections when enabled. By default, the SSH service is enabled
for LAN connections.
No, Yes
SSH protocol
version
Selects which SSH protocol versions are enabled in SSH Server.
It is recommended to allow only SSH protocol version 2 (SSH2) to
be used.
SSH1, SSH2
SSH public
keys
SSH Public keys can be added for remote logins with SSHkeys.
1MRS758459 C
Section 10
Service configuration
ARC600
53
User Manual
