ABB ARC600 Quick Start Manual Download

Page: 1 / 4

—

Quick Start Guide

ARC600 Wireless Controller

SIM card tray connector

Antenna connector SMA (female)

X2.1 connector for power supply

Pin 1 = L (Phase), 90...264 VAC
Pin 2 = N (Neutral)
Pin 4 = PE (Protective Earth)
Pin 6 = DC voltage in, 20...30 VDC
Pin 7 = GND

Power switch (bottom)

Ethernet connector and serial ports (bottom)

The device uses 230 V AC mains voltage. Carefully read through all the documentation

of this product and follow the local safety regulations. The device must not be operated

if any of the panels is removed. Voltage inside the device is extremely dangerous and
may cause death or severe injury.

Summary of Contents for ARC600

Page 1: ...in 6 DC voltage in 20 30 VDC Pin 7 GND 4 Power switch bottom 5 Ethernet connector and serial ports bottom 1 2 3 5 4 The device uses 230 V AC mains voltage Carefully read through all the documentation...

Page 2: ...ations you can log in to the Arctic Web user interface by using a Web browser and navigating to Network Mobile WAN If your SIM card requires a PIN code do not install it before you have configured the...

Page 3: ...me com As this setting depends on your mobile operator ensure the APN settings directly from the operator Set the other settings such as the PIN code authentication username and password if required b...

Page 4: ...ck of information in this document We reserve all rights in this document and in the subject matter and illustrations contained therein Any reproduction disclosure to third parties or utilization of i...