2
QU I CK STA RT G U I DE
A R G 6 0 0/A R R 6 0 0 W I R EL E SS G AT E WAY
—
Getting started
Power-up and SIM card installation
Insert the SIM card. Push the yellow button in the SIM card
slot to eject the SIM card tray. Insert the SIM card to the
tray (contacts facing up) and push it firmly and carefully
back to its holder. Attach the power supply and switch the
device on. Under normal circumstances, the device is able
to automatically connect to the operator’s cellular network.
In problem situations you can log in to the Arctic Web
userinterface by using Web browser and navigating to
Network → Mobile WAN
.
If your SIM card requires a PIN code, do not install
it before you have configured the Arctic device
PIN code settings.
Login to the Arctic Web user interface
Connect the Ethernet cable between the Arctic device
LAN port and your computer.
Configure your computer to use the same IP address space
as the Arctic device. For example, your computer IP could
be 10.10.10.11 with netmask 255.255.255.0. Check the
connection with the ping command.
Connect to the Arctic device using the web browser.
The default address of the Arctic device is https://10.10.10.10/.
Remember to use
https
and not http.
Accept the self-signed certificate in the browser.
Log in to the device. The username is
arctic-adm
and the
default password is
arcticm2m
.
It is highly recommended that the default
password
is changed
before the product is connected to a public
cellular network.
—
Figure 1. Browser https example
—
Figure 2. Welcome page in the ARG600 Web user interface
