Section 5
Network configuration
5.1
Defining host and domain names
1.
In the left pane, under
Systems
, select
General Settings
.
2.
In the
Hostname
field, enter the name of the device without the domain part.
3.
In the
Domain
field, enter the domain name.
5.2
Configuring communication interfaces
5.2.1
Configuring Ethernet LAN
1.
In the left pane, under
Network
, click
Ethernet LAN
.
2.
Set
Enabled
to
Yes
.
3.
Set
Interface
,
IP Address
and
Subnet mask
.
4.
Click
Submit
to save the settings.
5.2.2
Configuring Ethernet WAN
1.
In the left pane, under
Network
, click
Ethernet WAN
.
2.
Set
Enable
to
Yes
.
3.
Select a
WAN interface
.
4.
Select a
Configuration Mode
.
The “Manual (Static IP Address)” mode requires entering the values in the
Manual Settings
fields.
5.
Click
Submit
to save the settings.
Use the Connectivity Monitor settings when WAN redundancy functionality is
required. The Connectivity Monitor keeps checking the connection to the given
remote host to determine the network status. If the ping does not get an answer
within a given time window, it informs the WAN switch logic to try the secondary
interface.
5.2.3
Configuring the mobile WAN interface
1.
Set
Enable
to
Yes
.
2.
If the SIM card is protected by a PIN code, enter the code in the
PIN Code
field.
1MRS758456 H
Section 5
Network configuration
ARG600 Single SIM Variant
25
User Manual
