7. Mounting
The devices have been equipped with mounting arrangements
that are specially designed for DIN rail mounting. A set of DIN
rail mounting clips is recommended to be used when mounting.
The device should be mounted preferably inside a robust,
locked and weatherproof control cabinet.
As the device uses a cellular radio for data transmission, the
surrounding environment can negatively affect the efficacy of
these radio signals. Therefore, if a device with the antenna is
mounted on the antenna connector, the unit should not be
placed in a location where the radio signal might be shadowed,
and therefore deteriorated by nearby obstacles or enclosures.
The large metallic surfaces, racks or walls with metallic
structures (cabling, concrete iron, and so on) may degrade the
antenna performance to a very high extent. In this case, it is
highly recommended to use the optional external antenna with
appropriate cable. This allows for better positioning of the
devices, antennas and thus optimal performance.
Another restriction to the positioning of the device during
installation is that it should be mounted in such a way that the
required environmental conditions that are set in the Technical
data section of this product guide are met.
8. Ordering data
The product label contains basic information about the unit
such as product name, serial number and Ethernet MAC
address.
The product label is found at the bottom of the device.
Table 14. Ordering data
Description
ARP600A2260NA
ARP600A2560NA
Radio IF
LTE
LTE
Data speed max
100 Mbps
100 Mbps
LAN/WAN
1
4
RS-232/RS-485
2
2
SIM card
1
2
Supply voltage
12...48 VDC
12...36 VDC
Modbus RTU to Modbus TCP conversion
x
x
IEC-101 to IEC-104 conversion
x
x
DNP3 serial over TPC/IP
x
x
9. Accessories and ordering data
Table 15. Single SIM variant accessories
Accessory
Description
Order code
Rooflex puck antenna
GPRS, 3G and LTE compatible antenna. SMA
(m) connector. Gain 0 dBi.
2RCA037240
Rooflex Laird Phantom
GPRS, 3G and LTE compatible antenna. SMA
(m) connector. Gain 5.5 dBi.
2RCA037660
DIN rail clip set
DIN rail clips set (copper clips + screws)
2RCA028234
Accessory kit
Includes power supply, two-pin device power
connector, Main cable (euro), Null modem cable
(2 × D9), Ethernet cable (RJ-45, Cat5e UTP,
cross)
2RCA037645
Power supply
External power supply, two-pin, 100-240
VAC/12 VDC.
2RCA037246
Mains cable
Main cable for external power supply, Euro plug. 2RCA037647
Antenna adapter
FME (m) to SMA (m)
2RCA037659
Wireless Protocol Gateway
1MRS758463 B
ARP600
Product version: 3.3
ABB
15
